The IRG repeater system will undergo hardware and programming upgrades in 2023.
- Replacement of linking hardware and reprogramming of repeater controllers
- Changes in some zone configurations to allow for future expansion
- Addition of new repeaters
- Changes in linking codes and programming to improve reliability
- Phase-in of CTCSS ("PL tones") on repeaters
Find out more about what's planned....
Highlighted
Is your membership current?
Even though we may not be able to gather as a club during the pandemic, you can still join or renew on-line or via mail. Check the membership list for your expiry date. Your paid membership gives you access to the linking system and web site, and rights as a voting member of the IRG. Active paid membership shows our served and supporting agencies that amateurs are real, live people! Membership dues per year are $15.00 (Full) or $5.00 (Associate). See the Join or Renew page for more information.
Current network issues
Updated November 21;
North East Zone: VE9SID (St-Isidore) repeater audio wiring has been repaired and all is back to normal in this zone.
East Zone: Linking has been restored. This Zone linking code has CHANGED to the former Grove Hill Code (members - consult old linking map for old VE9STM code)
Grove Hill VE9STM: The transmit from this repeater has been restored as of November 14. Also note that this repeater is now in South-West Zone.
RAC Basic course registration underway
Want to jump into amateur radio? Registration is now underway for the next on-line RAC Basic Qualification course, starting April 15. Click here for more details.
Miramichi repeater (VE9MIR) now fully tone-enabled
As of Tuesday, January 30, the Miramichi repeater at Chaplin Island Road (VE9MIR 147.150+) is fully CTCSS enabled - users will need to use a PL tone of 151.4 Hz to transmit via the repeater. For a full list of updated repeaters, visit the IRG revamp page.
Mount Carleton repeater now linkable, CTCSS enabled
The solar-powered Mount Carleton Park repeater (VE9MCP 147.120+) is now linked into the IRG system grouped with the North-West Zone. Any reports of operation are appreciated, as there were issues with audio which now seem to be resolved.
As of Friday, November 24, the solar-powered Mount Carleton repeater was fully CTCSS enabled - users will need to use a PL tone of 151.4 Hz to transmit via the repeater. For a full list of updated repeaters, visit the IRG revamp page.
East Zone repeaters now tone-enabled
As of Monday, December 4, the East Zone repeaters are fully CTCSS enabled - users will need to use a PL tone of 151.4 Hz to transmit via these repeater. This includes Moncton VE1MTN (147.090 +), Acadieville VE9ACD (145.430 -) and Sackville VE9SKV (145.230 -). For a full list of updated repeaters, visit the IRG revamp page.
Campobello Island (146.955-) now linked
Update Note: The repeater has intermittent audio loss out to other repeaters, users on other repeaters may sometimes hear only carrier and no audio from users on VE9GMI. The Campobello Island (VE9GMI 146.955 -) is now linked with the South West Zone. The repeater had been stand-alone after being moved from Grand Manan Island, following a decommissioning of that site. Also note the revamp page has updated information, it previously listed the offset as a “+” it should have read “-“ (minus).
Grand Lake VE9GLA (145.190-) now tone-enabled
As of Wednesday, November 15, the Grand Lake repeater at Hardwood Ridge (VE9GLA 145.190-) is fully CTCSS enabled - users will need to use a PL tone of 151.4 Hz to transmit via the repeater. For a full list of updated repeaters, visit the IRG revamp page.
Stanley VE9NRV repeater now tone-enabled
As of Wednesday, October 11, the Stanley VE9NRV repeater (147.030) is fully CTCSS enabled - users will need to use a PL tone of 151.4 Hz to transmit via the repeater. For a full list of updated repeaters, visit the IRG revamp page.